Pack: PoolRx Blue Unit and Blue Booster
- Treats 30K – 40K (if used all at the same time)
- Treats 7.5K – 20K with replenishment minerals (if using Blue/White Unit first, and replenishing with Booster minerals as needed)
- Eliminates All Algae
- Reduces Chemical Demand
- Simplifies Pool Care
- Also Ideal for Salt Pools
• Copper Sulphate Pentahydrate: 52.8%
• Other Ingredients: 47.2%
PoolRx Pool Unit:
PoolRx contains a proprietary blend of minerals that continuously and effectively eliminate algae. The specially treated alloy cylinder is packed with PoolRx granular formulation.These minerals immediately dissolve out of the cylinder and form a stable residual throughout the pool water for up to 6 months. The minerals eliminate the algae while freeing up low levels of chlorine to be more active and productive in the water. During the pool’s filtration process the minerals are rejuvenated every time they return and pass through the cylinder. PoolRx works synergistically with a constant low level of chlorine.
Also Ideal for Salt Pools:
PoolRx improves the saltwater experience. The minerals reduce the salt chlorine production needed to keep your salt pool algae free. Less salt chlorine production extends the life of the salt cell and reduces the amount of acid needed to balance the pH. PoolRx prolongs the life of your equipment, saves you money, and improves the quality of your water.
Directions for use:
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.
• Clean or backwash your filter before adding PoolRx and remove all debris from skimmer andpump basket.
• Place the PoolRx pool unit into Pump Basket or Skimmer. Ideally place in pump basket for increasedwater flow.
• The PoolRx pool unit should be added to the pool when the pump has at least 3 to 4 hours left on runcycle. This will ensure the granular completely dissolves out of the unit and through the filter into the pool.
• Pump should run during the heat of the day.
• Your pool should turn over its total volume of water at least 1.5 times per day. Generally, this will require 6 to 8 hours of pump runtime depending on gallons of water and pump flow rate. Do not re-clean or backwash filter for at least 2 weeks after PoolRx pool unit is installed so granular can dissolve through the filter, whether it is a cartridge, D.E. or sand filter.
30K – 40K
Maintain normal pool chemistry ranges:
|Residential||Chlorine (ppm)||min. 0.5 - 1.0|
|Commercial||Chlorine (ppm)||1.0 - 5.0|
|-||pH||7.2 - 7.8|
|-||Alkalinity||80 - 120|
|-||Cyanuric Acid||10 - 80|
• Replace the Poolrx unit in basket every 12 months.
• If algae is coming back or the water looks dull you know it’s time to add PoolRx booster minerals.
• Add a PoolRx booster after 4-6 Months if needed.
• No need for phosphate removers, algaecides, clarifiers.
• PoolRx is not compatible for use with bromine or biguanides.
• Do not add Cal-Hypo products directly to your pool. Cal-Hypo products must be diluted prior to adding to your pool.